Tesla Model 3 Owners & Service Manuals

Tesla Model 3: Cover - Rocker Panel - Lower - LH (Remove and Replace)

Tesla Model 3 2017-2026 Service Manual / Exterior Fittings / Exterior Trim / Cover - Rocker Panel - Lower - LH (Remove and Replace)

Cover - Rocker Panel - Lower - LH (Remove and Replace)

Remove

Cover - Rocker Panel - Lower - LH (Remove and Replace)

  1. Release the LH lower rocker panel bolt covers.

Cover - Rocker Panel - Lower - LH (Remove and Replace)

  1. Remove the bolts that attach the LH lower rocker panel cover to the body.  Torque 5 Nm

Front
Front

Rear
Rear

  1. Release the clips that attach the LH lower rocker panel cover to the front and rear wheel arch liners.

Cover - Rocker Panel - Lower - LH (Remove and Replace)

  1. Release the clips that attach the LH lower rocker panel cover to the rocker panel, and then remove the cover from the panel.

Install

Installation procedure is the reverse of removal.

    READ NEXT:

     Spoiler

     Spoiler - Rear (Retrofit using Jig)

    SPECIAL TOOLS Kit, Spoiler Alignment, M3 (1479070-00-A ) Procedure Clean the installation surface of the spoiler with isopropyl alcohol (IPA) wipes, and allow it to dry before continuing. Note

     Spoiler - Rear (Retrofit using Tape)

    Procedure Clean the installation surface of the spoiler with isopropyl alcohol (IPA) wipes, and allow it to dry before continuing. Note: Clean any moisture or contaminates that might be prese

    SEE MORE:

     Sensor - Airbag - Front - LH (Remove and Replace)

    Remove Remove the front LH wheel arch liner. See Wheel Arch Liner - Front - LH (Remove and Replace). Disconnect the electrical wiring harness connector from the LH front airbag sensor. Remove the bolt that attaches the airbag sensor to the front end carrier, and then remove the s

     Steering Rack (Dual Motor) (Remove and Replace)

       Caution: Vehicles built before March 25th, 2019 have 1st generation front subframes. Vehicles built on March 25th, 2019 and after have 2nd generation front subframes. 1st generation subframes require special M8 bolts to

    © 2019-2026 Copyright www.tmodel3.com