Tesla Model 3: Wheel Arch Liners

 Hose - Heat Exchanger to Superbottle - Front Drive Unit (Remove and Replace)

Remove Remove the superbottle. See Superbottle (Dual Motor) (Remove and Replace). Install Installation procedure is the reverse of removal. Caution: Perform a push-pull test to verify that the hose is fully seated

 Hose - Return - HV Battery (Remove and Replace)

Remove Remove the HV battery. See HV Battery (RWD) (Remove and Install). Release the clip and disconnect the RH inner HV battery return hose fitting from the RH end of the HV battery platter enclosure. Release the clips that attach the RH inner HV battery return hose to the HV batter