Tesla Model 3 Owners & Service Manuals

Tesla Model 3: Wheel Arch Liner - Front - LH (Remove and Replace)

Tesla Model 3 2017-2025 Service Manual / Exterior Fittings / Wheel Arch Liners / Wheel Arch Liner - Front - LH (Remove and Replace)

Wheel Arch Liner - Front - LH (Remove and Replace)

SPECIAL TOOLS

Pliers, Clip Removal (1133569-00-A)

Remove

  1. Remove the LH front wheel. See Wheel (Remove and Install).

Wheel Arch Liner - Front - LH (Remove and Replace)

  1. Remove the bolt and release the clips (x18) that attach the LH front wheel arch liner to the vehicle, and then remove the liner from the vehicle.   Torque 5 Nm

Install

Installation procedure is the reverse of removal.

    READ NEXT:

     Wheel Arch Liner - Rear - LH (Remove and Replace)

    SPECIAL TOOLS Pliers, Clip Removal (1133569-00-A) Remove Remove the LH rear wheel. See Wheel (Remove and Install). Remove the bolt and release the clips (x16) that attach the LH rear whe

     Undertray and Diffuser

     Diffuser - Rear Fascia (Remove and Replace)

    Remove Raise and support the vehicle. See Raise Vehicle - 2 Post Lift. Remove the bolts that attach the rear fascia diffuser to the mid aero shield.   Torque 5 Nm Remove t

    SEE MORE:

     Glass - Door - LH - Rear (Adjust)

    DRAFT Warning: This procedure was derived from pre-production computer models, and might not reflect the real-world situation. Warnings and cautions might be missing. Follow safety requirements and use extreme caution when working on or near high voltage systems and components. Do not redistr

     Bracket - License Plate - Front (EMEA) (Retrofit using Template)

    Procedure Clean the front center surface of the front fascia. Align the template with the parking sensors, and then use masking tape to hold the template in place. LH side shown, RH side similar Align the front license plate bracket over the template, and then secure the bracket

    © 2019-2025 Copyright www.tmodel3.com