Tesla Model 3: Horns
READ NEXT:
Horn - High Tone (Remove and Replace)
Remove
Remove the rear underhood apron. See
Underhood Apron - Rear (Remove and Replace).
Remove the cabin intake duct. See
Duct - Cabin Intake (Remove and Replace).
Remove the hood latch cover
Horn - Low Tone (Remove and Replace)
Remove
Remove the front fascia. See
Remove.
Disconnect the harness from the low tone horn connector.
North America
Remove the bolt that attaches the horn to the carrier, and remove th
Pedestrian Warning Speaker
Speaker - Pedestrian Warning (Remove and Replace)
Remove
Remove the front fascia. See
Fascia - Front (Remove and Install).
Remove the screws that attach the pedestrian warning speaker assemb
SEE MORE:
Fascia - Rear - Lower (Remove and Replace)
DRAFT
Warning:
This procedure was derived from pre-production computer models, and
might not reflect the real-world situation. Warnings and cautions might be
missing. Follow safety requirements and use extreme caution when working on or
near high voltage systems and components.
Do not redistr
Trim - Lid - Trunk (Remove and Replace)
Remove
Open the trunk.
Release the clips at the upper corners, then work around the trim to
release the clips that attach the trunk trim to the trunk lid.
Note: The clips (x4) closest to the rear window have a higher
retention force; use a clip prytool, if necessary. Remove any broken
© 2019-2026 Copyright www.tmodel3.com
