Tesla Model 3 Owners & Service Manuals

Tesla Model 3: Headliner

READ NEXT:

 Coat Hook - Rear - LH (Remove and Replace)

Remove Remove the headliner. See Headliner (Remove and Install). Release the clips that attach the bezel to the LH rear coat hook, and then remove the coat hook from the headliner.

 Headliner (Remove and Install)

Remove Remove the RH side rail trim. See Trim - Side Rail - LH (Remove and Replace). Push to open the RH rear coat hook. Pry open the RH rear coat hook screw cover with a small flat head

 Headliner (Remove and Replace)

Remove Remove the headliner. See Headliner (Remove and Install). Release the clips that attach the LH and RH headliner tweeter covers to the headliner, and remove the tweeter covers from

SEE MORE:

 Bracket - License Plate - Front (EMEA) (Retrofit using Template)

Procedure Clean the front center surface of the front fascia. Align the template with the parking sensors, and then use masking tape to hold the template in place. LH side shown, RH side similar Align the front license plate bracket over the template, and then secure the bracket

 Reflex Lens - Rear - RH (Remove and Replace)

Remove Note: This procedure applies only to the RH side. The LH rear reflex lens is part of the charge port. Apply masking around the RH rear reflex lens. Use a plastic trim tool to release the clips that attach the RH rear reflex lens to the body, and then remove the RH rear reflex lens f

© 2019-2024 Copyright www.tmodel3.com