Tesla Model 3 Owners & Service Manuals

Tesla Model 3: Door Glass and Regulators

Tesla Model 3 2017-2025 Service Manual / Closures / Door Glass and Regulators

READ NEXT:

 Glass - Door - LH - Front (Adjust)

DRAFT Warning: This procedure was derived from pre-production computer models, and might not reflect the real-world situation. Warnings and cautions might be missing. Follow safety requirements

 Glass - Door - LH - Front (Remove and Replace)

SPECIAL TOOLS TOOLKIT, WINDOW SWITCH (1454796-00-A) Warning: The side impact airbag deployment depends on the front door sensor's ability to detect a side impact from air pressure. Make sure that

 Glass - Door - LH - Rear (Adjust)

DRAFT Warning: This procedure was derived from pre-production computer models, and might not reflect the real-world situation. Warnings and cautions might be missing. Follow safety requirements

SEE MORE:

 Seal - Body - Side - Front - Primary - LH (Remove and Replace)

Remove Remove the LH B-pillar applique. See Applique - B-Pillar - LH (Remove and Replace). Release the clips (x3) that attach the front LH primary body seal to the mid B-pillar, the upper B-pillar, and the mid A-pillar. Pull on the seal to remove it from the body. Install Loos

 Heat Exchanger - Front Drive Unit (Remove and Replace)

Remove Remove the front subframe assembly. See Subframe Assembly - Front (Dual Motor) (Remove and Install) Release the clip that connects the front drive unit inverter-heat exchanger hose to the heat exchanger coolant inle Release the clips that attach the front drive unit inverter-

© 2019-2025 Copyright www.tmodel3.com