Tesla Model 3: Brakes
- Torque Specifications - Brakes
- Brake Discs and Calipers
- Brake Caliper - Front - LH (Remove and Replace)
- Brake Caliper - Rear - LH (Remove and Replace)
- Brake Pads - Burnishing
- Brake Pad Kit - Front (Base Brakes) (Remove and Replace)
- Brake Pad Kit - Front (Sport Brakes) (Remove and Replace)
- Brake Pad Kit - Rear (Base Brakes) (Remove and Replace)
- Brake Pad Kit - Rear (Sport Brakes) (Remove and Replace)
- Brake Rotor - Front - LH (Remove and Replace)
- Brake Rotor - Rear - LH (Remove and Replace)
- Shield - Dust - Brake - Front - LH (Remove and Replace)
- Shield - Dust - Brake - Rear - LH (Remove and Replace)
- Shield - Dust - Brake - Rear - LH and RH (Retrofit)
- Brake Pipes and Hoses
- Brake Fluid Bleed - One Caliper
- Brake Fluid Bleed / Flush
- Brake Fluid Check
- Brake Hose - Flexible - Front - LH (Remove and Replace)
- Brake Hose - Flexible - Rear - LH (Remove and Replace)
- Brake Lines - 4 Tube Bundle - ABS to Wheels (Remove and Replace)
- Brake Lines - LH Sill (Remove and Replace)
- Brake Lines - Master Cylinder to ABS (Remove and Replace)
- Brake Lines - Rear - LH to Sill (Remove and Replace)
- Brake Lines - Rear - RH to Sill (Remove and Replace)
- Parking Brake
- ABS Traction and Stability Control
- ABS Modulator (Remove and Replace)
- Sensor - Wheel Speed - ABS - Front - LH (Remove and Replace)
- Sensor - Wheel Speed - ABS - Rear - LH (Remove and Replace)
- Brake Booster
- Booster - Brake - Electromechanical (LHD) (Remove and Replace)
- Master Cylinder and Reservoir Assembly (Remove and Replace)
- Brake Pedal
READ NEXT:
Torque Specifications - Brakes
Table 1.
Torque Specifications: Brake
Caliper - Front
Table 2.
Torque S
Brake Caliper - Front - LH (Remove and Replace)
SPECIAL TOOLS
Skt, 1/2" Dr, E18 Torx
(1133187-00-A)
Skt, 1/2" Dr, E18 Torx
(1133187-XX-A & -01-A)
Remove
SEE MORE:
Electric Vehicle Components
High Voltage Components
Air Conditioning Compressor
Front Motor (Dual Motor vehicles only)
Cabin Heater
High Voltage Battery
High Voltage Battery Service Panel
Rear Motor
High Voltage Cabling
Charge Port
Warning: The high voltage system has no user serviceable parts. Do
no
Striker - Trunk (Remove and Replace)
Remove
Remove the rear trunk sill trim. See Trim - Sill - Trunk (Remove and
Replace).
Use masking tape to mark the location of the trunk striker.
Remove the bolts that attach the trunk striker to the body, and then
remove the striker from the vehicle.
Install
Align the trunk
© 2019-2026 Copyright www.tmodel3.com
