Tesla Model 3 2017-2026 Owner's Manual
Tesla Model 3 2017-2026 Owner's Manual
Owner's Manual for first generation Tesla Model 3.
- Overview
- Opening and Closing
- Seating and Safety Restraints
- Driving
- Driver Profiles
- Steering Wheel
- Mirrors
- Starting and Powering Off
- Gears
- Lights
- Car Status
- Wipers and Washers
- Braking and Stopping
- Traction Control
- Park Assist
- Vehicle Hold
- Track Mode
- Getting Maximum Range
- Rear View Camera
- Dashcam
- Cold Weather Best Practices
- Autopilot
- About Autopilot
- Traffic-Aware Cruise Control
- Autosteer
- Autopark
- Summon
- Smart Summon
- Lane Assist
- Collision Avoidance Assist
- Speed Assist
- Using the Touchscreen
- Controls
- Climate Controls
- Maps and Navigation
- Media and Audio
- Phone
- Calendar
- Using Voice Commands
- Security Settings
- HomeLink Universal Transceiver
- Connecting to Wi-Fi
- Software Updates
- Charging
- Maintenance
- Maintenance Schedule
- Tire Care and Maintenance
- Cleaning
- Wiper Blades and Washer Jets
- Fluid Reservoirs
- Jacking and Lifting
- Parts and Accessories
- Specifications
- Roadside Assistance
- Consumer Information
READ NEXT:
Overview
This section provides the main information about the Tesla Model 3 car, describing its key characteristics, technologies and capabilities.
Here is a general description of the interior and exterior,
Interior Overview & Exterior Overview
Interior Overview
Door open button
High beams, turn signals and wipers and washers
Horn
Gear selector, Traffic-Aware Cruise Control and Autosteer
Touchscreen
Touchscreen Overview
The features and information you need to drive Model 3 are displayed on the touchscreen. When driving, the touchscreen displays driving-related information such as driving speed, vehicle range, warn
SEE MORE:
Subframe Assembly - Rear - Install
Install
Position the subframe lifting tool and subframe underneath the vehicle.
Connect the air line to the subframe lifting tool.
With an assistant, slowly raise the rear drive unit and subframe into
position.
Caution:
Assist with the routing of HV harnesses and coolant hoses through
compo
Blower Motor - HVAC (Remove and Replace)
Remove
Remove the HVAC assembly. See
HVAC Assembly (Remove and Replace).
Remove the screws that attach the HVAC fan motor to the HVAC assembly,
and then remove the motor from the HVAC assembly.
Install
Position the HVAC fan motor on the HVAC assembly.
Install the screws that at
© 2019-2026 Copyright www.tmodel3.com
