Tesla Model 3 2017-2026 Owner's Manual
Tesla Model 3 2017-2026 Owner's Manual
Owner's Manual for first generation Tesla Model 3.
- Overview
- Opening and Closing
- Seating and Safety Restraints
- Driving
- Driver Profiles
- Steering Wheel
- Mirrors
- Starting and Powering Off
- Gears
- Lights
- Car Status
- Wipers and Washers
- Braking and Stopping
- Traction Control
- Park Assist
- Vehicle Hold
- Track Mode
- Getting Maximum Range
- Rear View Camera
- Dashcam
- Cold Weather Best Practices
- Autopilot
- About Autopilot
- Traffic-Aware Cruise Control
- Autosteer
- Autopark
- Summon
- Smart Summon
- Lane Assist
- Collision Avoidance Assist
- Speed Assist
- Using the Touchscreen
- Controls
- Climate Controls
- Maps and Navigation
- Media and Audio
- Phone
- Calendar
- Using Voice Commands
- Security Settings
- HomeLink Universal Transceiver
- Connecting to Wi-Fi
- Software Updates
- Charging
- Maintenance
- Maintenance Schedule
- Tire Care and Maintenance
- Cleaning
- Wiper Blades and Washer Jets
- Fluid Reservoirs
- Jacking and Lifting
- Parts and Accessories
- Specifications
- Roadside Assistance
- Consumer Information
READ NEXT:
Overview
This section provides the main information about the Tesla Model 3 car, describing its key characteristics, technologies and capabilities.
Here is a general description of the interior and exterior,
Interior Overview & Exterior Overview
Interior Overview
Door open button
High beams, turn signals and wipers and washers
Horn
Gear selector, Traffic-Aware Cruise Control and Autosteer
Touchscreen
Touchscreen Overview
The features and information you need to drive Model 3 are displayed on the touchscreen. When driving, the touchscreen displays driving-related information such as driving speed, vehicle range, warn
SEE MORE:
Bolster - Side - Seat - 2nd Row - LH (Remove and Replace)
Remove
Fold down the LH 2nd row seat.
Pull the 2nd row side bolster inward, and then move the bolster up to
remove from the vehicle.
Remove and discard the bolster plastic bracket from the vehicle.
Note: The bracket might have come out with the bolster
Install
Install new bolster
Module - Cooling Fan (Remove and Replace)
Remove
Remove the cooling fan module. See Module - Cooling Fan (Remove and
Install).
Release the clips (x14) that attach the active grille shutter to the
cooling fan module, and then remove the active grille shutter from the
module.
Remove the screws (x2) that attach the radiat
© 2019-2026 Copyright www.tmodel3.com
